Knowledge

About the functions of various components of plate heat exchangers

Nov 01, 2023 Leave a message

1. Heat transfer plate

The heat transfer plate is the primary heat exchange element of the heat exchanger. Generally, the corrugation is in the shape of a figure. According to the different fluid media, the data of the heat transfer plate are also different. Most of them are made of stainless steel and titanium.

2.Sealing gasket

The sealing gasket of a plate heat exchanger primarily serves as a sealing effect between the heat exchange plates. Information includes: nitrile rubber, ethylene propylene diene monomer rubber, fluororubber, etc. Different rubbers are selected based on different media.

3.Pressure plate at both ends

The pressing plates at both ends are primarily used to clamp and compress all the heat transfer plates, ensuring that the fluid medium does not leak.

4. Clamping bolt

The clamping bolt primarily serves to tighten the pressure plates at both ends. Clamping bolts are usually double threaded, and when pre tightening the bolts, the torque of the fixing plate is evenly distributed.

Send Inquiry