Welded Plate Heat Exchanger

A: We are factory.

A: Generally it takes 7-10 workdays to finish products(when the order quatities is smaller than 200 pcs) ,and it is 10 days by DHL or Fedex if the goods are ready for samples. or it is 15-20 days by sea according to the different countries.

A: Yes, we could offer the sample for charges, after you confirm the drawings.

A: We could make sure high quality and competitive price. OEM/ODM service is what we are good at Following fashion trend,our catalog will be updated regularly .

A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance ,balance before shippment.If you have another question, pls feel free to contact us !

A: lf there is any quality problem or question, we could offer technical support or return service.

A: To meet our competitive global market, we often take sales promotion product for our clients.
Please feel free to contact us at any time.

A: Our products have high rate of quality and price, we believe that most of our clients are making aconsiderable profit.

A: Any inquiries will be replied within 24 hours, but holidays are excepted

A: This means that the heat-transfer plates are welded together with no need for an external gasket. Gasketed plate heat exchangers are suitable for many applications, but are limited in terms of temperature and pressure, coupled with the fact that there is always a risk of gasket failures and/or permeation.

A: If the crack is too large–or if it is accompanied by excessive amounts of internal corrosion–the heat exchanger will likely need to be replaced. Yet small cracks can often be repaired by welding a metal patch over the damaged area.

A: A blocked heat exchanger can trigger a rapid increase in pressure within your combi boiler. The accumulation of debris restricts water flow. Causing it to exert excess pressure on the internal components of the system. This increased pressure can be dangerous and may potentially lead to leaks or burst pipes.

A: Welded plate heat exchangers are made by welding the plates together at the edges. It creates a stronger joint that can withstand higher temperatures and pressures than either gasketed or brazed plate heat exchangers.

A: Plate heat exchangers boast a high heat transfer coefficient due to the corrugated surface of the plates. This design creates turbulence in the fluid flow, maximizing heat exchange efficiency.

A: Typical plate thickness being 0.6 mm and operating pressure between 8Bar – 16 Bar while 25Bar is the maximum pressure at which such plate type coolers can be used due to the restriction in the pressure that the nitrile rubber joints can hold.

A: The wide gaps between plates allow fibers and particles to easily pass through the heat exchanger with minimum clogging. They can be configured with wide-wide or wide-narrow channels, which make the units ideal for heating, cooling and interchanging duties.