During the use and operation of plate heat exchangers in various heat exchange conditions in civil and industrial applications, problems such as leakage, abnormal pressure or temperature, and blockage often occur due to improper operation or equipment loss. Therefore, on-site operators or technicians need to master the relevant knowledge of heat exchanger cleaning, repair, and maintenance to ensure the normal operation of the heat exchange product system, So as to ensure the normal operation of each heat exchange condition.
The editor will introduce common faults and causes of plate heat exchangers to everyone:
1. Leakage (1) Shutdown leakage: The main reason is frequent start stop operation of the plate heat exchanger, which can be restored to normal working conditions; (2) Leakage: The main reason is that the sealing gasket of the heat exchanger is misaligned, deviated from the sealing groove, damaged or aged, the plate is corroded or deformed, the clamping size is uneven or not in place, and the clamping bolts are loose; (3) Internal leakage: The main cause is aging or damage of the sealing gasket, as well as corrosion and perforation of the plate;
(4) Leakage between blind plate and clamping plate: The main reason is that the blind plate is penetrated by a hard object. 2. Abnormal pressure drop (1) The pressure drop is greater than the design value; (2) The actual flow rate is greater than the design value; (3) Blockage of inter board channels; (4) The inlet of the plate corner hole is blocked. 3. Abnormal heat exchange temperature (1) High outlet temperature on the hot side: The main reason is that the selection is too small, the heat exchange area is insufficient, the hot side flow rate is greater than the design value, the plate is scaled, the plate is blocked, or the cold side flow rate is small. (2) The outlet temperature on the cold side is too low: the main reason is that the flow rate on the hot side is small or the temperature is lower than the design value, resulting in plate fouling and blockage. During the operation of a plate heat exchanger, when a malfunction occurs, the cause of the malfunction should be analyzed and promptly resolved to ensure the normal operation of the heat exchange equipment.
Common faults and causes of plate heat exchangers
Jan 25, 2024
Leave a message
Send Inquiry
